| MC尼龙板 |
| 添加时间：2018/9/27 15:00:00 浏览次数： |
| （1）高强度，能够长时间承受负荷； (1) high strength, able to bear load for a long time. （2）良好的回弹性，能够弯曲不变形，同时能保持韧性，抵抗反复冲击； (2) good resilience, capable of bending without deformation, maintaining toughness at the same time, resisting repeated impact. （3）耐磨自润滑性、提供了优于青铜、铸铁、碳钢和酚醛压板在无油或（脱油）润滑应用时的工作性能，降低消耗，节约能源； (3) Wear-resistant and self-lubricating, providing better performance than bronze, cast iron, carbon steel and phenolic laminates in oil-free or degreasing applications, reducing consumption and saving energy; （4）吸噪音、减震，MC尼龙模量比金属小的多，对震动的衰减大，林甸尼龙板，提供了优于金属的防止噪音比效的实用途径。 (4) Absorbing noise and damping, MC nylon modulus is much smaller than metal, and the vibration attenuation is greater. Lindian nylon plate provides a practical way to prevent noise than metal. （5）与金属相比，MC尼龙硬度低，不损伤对磨件； (5) compared with metal, MC nylon has low hardness and no damage to grinding parts. （6）低摩擦系数，提供了其在摩擦件上广泛应用可能； (6) low friction coefficient provides wide application in friction parts. （7）高化学稳定性，耐碱、醇、醚、碳氢化合物、弱酸、润滑油、洗涤剂、水（海水），mc尼龙板价格，并具有无臭、无味、无锈的特点，含油稀土尼龙板，为其广泛用在抗碱耐腐蚀、环保卫生、食品、纺织印染等等方面的机械零部件使用提供了优良条件； (7) High chemical stability, alkali resistance, alcohols, ethers, hydrocarbons, weak acids, lubricants, detergents, water (sea water), MC nylon board price, and has odorless, odorless, rust-free characteristics, oil-containing rare earth nylon board, for its widely used in alkali resistance, corrosion resistance, environmental protection, hygiene, food, textile printing and dyeing machinery, etc. The use of mechanical parts provides excellent conditions. （8）MC尼龙产品可根据用户需要做成各种颜色，还可根据产品要求添加二硫化钼，炭黑，石墨，玻纤等材料进行改性。 (8) MC nylon products can be made into various colors according to user's needs, and can be modified by adding molybdenum disulfide, carbon black, graphite, glass fiber and other materials according to product requirements. （9）MC尼龙限在下列环境和介质中不可使用： (9) MC nylon limit shall not be used in the following environments and media: A、使用温度长期超过120℃ A, the service temperature is over 120 C for a long time. B、强酸、苯酚、次氯酸钠、氯化钡等。 B, strong acid, phenol, sodium hypochlorite, barium chloride and so on. ○用途：广泛用于化工机械，防腐设备的制齿轮及零件坯料 。耐磨零件，传动结构件，家用电器零件，汽车制造零件，丝杆防止机械零件，化工机械零件，化工设备。如涡轮、叶轮、曲柄、仪表板，驱动轴，阀门、叶片、丝杆、高压垫圈、密封圈，梭子、套简，轴套连接器等。 Uses: widely used in chemical machinery, anti-corrosion equipment, gear and spare parts. Wear-resistant parts, transmission structure parts, household electrical appliances parts, automotive parts, screw preventive mechanical parts, chemical machinery parts, chemical equipment. Such as turbine, impeller, crank, dashboard, drive shaft, valve, blade, screw, high-pressure washer, sealing ring, shuttle, sleeve, shaft sleeve connector, etc. ○板材：8～250mm x 600x1200mm / 1220mmx2440mm Plate: 8 ~ 250mm x 600x1200mm / 1220mmx2440mm ○棒材：6～300mmx700mm Bar: 6 ~ 300mmx700mm |
| 上一页 含油稀土尼龙衬板产品性能 |
| 下一页 尼龙衬板性能 |
Copyright © 技术支持：遨游网络