MC尼龙的性质：
Properties of MC nylon:
（1）高强度，能够长时间承受负荷；
(1) high strength, able to bear load for a long time;
（2）良好的回弹性，能够弯曲而不变形，同时能保持韧性，抵抗反复冲击；
(2) good resilience, able to bend without deformation, keep toughness and resist repeated impact;
（3）耐磨自润滑性，提供了优于青铜铸铁碳钢和酚醛层压板在无油（或脱油）润滑应用时的工作性能，降低消耗，节约能源；
(3) wear resistance and self-lubricating, which provides better performance than bronze cast iron carbon steel and phenolic laminate in oil-free (or deoiling) lubrication application, reduces consumption and saves energy;
（4）吸噪声、减震，MC尼龙模量比金属小得多，对震动的衰减大，提供了优于金属防止噪音的实用途径；
(4) absorbing noise and damping, MC nylon modulus is much smaller than that of metal, and the attenuation of vibration is larger, which provides a practical way to prevent noise better than metal;
（5）与金属相比， MC尼龙硬度低，不损伤对磨件；
(5) compared with metal, MC nylon has low hardness and does not damage the wear parts;
（6）低mc系数，提供了其在摩擦件上广泛应用可能；
(6) low MC coefficient makes it possible to be widely used in friction parts;
（7）高化学稳定性，耐碱、醇、醚、碳氢化合物、弱酸、润滑油、洗涤剂、水（海水），并具有无臭、无毒、无味、无锈的特点，为其广泛应用在抗碱腐蚀，环保卫生、食品、纺织印染等方面的机械零部件使用提供了优良条件。
(7) high chemical stability, resistance to alkali, alcohol, ether, hydrocarbon, weak acid, lubricating oil, detergent, water (sea water), and has the characteristics of odorless, non-toxic, tasteless and rust free, which provides excellent conditions for the use of mechanical parts widely used in alkali corrosion resistance, environmental protection and sanitation, food, textile printing and dyeing, etc.
（8）简化机器的维修保养、节约劳动力，优良的机械切削加工性能、提高劳动生产力。
(8) simplify the maintenance of the machine, save labor, have excellent mechanical cutting performance and improve labor productivity.
（9）MC尼龙限在下列环境和介质中使用：
(9) MC nylon is limited to the following environments and media:
a、使用温度长期超过120℃；
A. the service temperature exceeds 120 ℃ for a long time;
b、强酸、苯酚、氯酸钠、氯化钡等；
B. strong acid, phenol, sodium chlorate, barium chloride, etc;
c、高精度机器的关键零部件。
C. key parts of high-precision machine.