铸石板、微晶板：这两种材料的安装方法几乎相近，均是用化学原料调制成粘合剂，将安装母体内壁清洗干净，粘结上衬板即可。其粘贴工艺与墙面砖的粘贴方法没有太大的区别。
Cast stone plate and microcrystalline plate: the installation methods of these two materials are almost the same. They are all made of chemical raw materials into adhesives, which can clean the inner wall of the installation matrix and bond the upper lining plate. There is not much difference between the paste technology and the paste method of wall tiles.
此类衬板的安装工艺的优点是：粘贴方便、省工省时，粘贴速度快。缺陷是：首先，因其安装母体、衬板以及粘合剂非一种材料，其热胀冷缩系数也各不一样，所以随着四季温度的变化，易导致粘载体和粘结体的分裂，产生掉板现象。轻者掉下去的衬板通过下面的设备时，设备无伤通过，重者会损坏下道工序的设备。其次，因其是粘贴到衬板母体上的，所以安装结束后，一般需要15天左右的凝固周期。假如企业急需要马上开工生产，会因凝固期不到而被迫推迟生产，影响企业效益。
The advantages of this kind of lining plate installation technology are: easy to paste, labor-saving and time-saving, and fast to paste. The defects are as follows: first of all, because the installation matrix, lining plate and adhesive are not a kind of material, their coefficient of thermal expansion and cold shrinkage are also different, so with the change of temperature in four seasons, it is easy to cause the split of adhesive carrier and adhesive body, resulting in the phenomenon of plate dropping. When the lining board dropped by the lighter passes through the equipment below, the equipment will pass without damage, and the equipment of the next process will be damaged by the heavier. Secondly, since it is pasted on the liner body, it usually takes about 15 days to set after installation. If the enterprise urgently needs to start production immediately, it will be forced to postpone production because the solidification period is not reached, which will affect the enterprise benefit.